Finite element analysis of performance in the skulls of marmosets and tamarins

Journal of Anatomy, 2010

Reliance on plant exudates is a relatively rare dietary specialization among mammals. One well-studied example of closely related exudate feeders is the New World marmosets and tamarins. Whereas marmosets actively gouge tree bark with their incisors to stimulate the flow of sap, tamarins are opportunistic exudate feeders that do not gouge bark. Several studies of the dentaries and jaw adductors indicate that marmosets exhibit specializations for increased gape at the expense of bite force. Few studies, however, have looked to the cranium of marmosets for evidence of functional specializations. Using 3D finite element models of the marmoset Callithrix jacchus and the tamarin Saguinus fuscicollis, we investigated the performance of the cranium under loading regimes that mimicked unilateral molar biting and bark-gouging. We investigated three measures of performance: the efficiency with which muscle force is transferred to bite force, the extent to which the models are stressed (a predictor of failure), and the work expended by muscles as they deform the skull (total strain energy). We found that during molar biting the two models exhibited similar levels of performance, though the Saguinus model had slightly higher mechanical efficiency, a slightly lower state of stress, and expended more energy on deformation. In contrast, under the bark-gouging load, Callithrix exhibited much higher mechanical efficiency than Saguinas, but did so at the expense of more work and higher levels of von Mises stress. This analysis illustrates that differences in the shapes of the skulls of Callithrix and Saguinus confer differences in performance. Whether these aspects of performance are targets of selection awaits broader comparative analyses.

Journal of Mammalogy, 2019

A primary requirement of the mammalian skull is to exert forces on different foods and to resist the forces imposed on it during feeding. Skull shape patterns within and among mammals are generally well known, but the biomechanical relevance of this variation remains limited for some groups. By integrating geometric morphometric and biomechanical analyses, we test the hypothesis that skull shape in peccaries reflects biomechanical attributes to generate and dissipate powerful forces, presumably in response to tough foods. We obtained skull shape and size from 213 specimens of the three living peccary species and estimated bite force, bite stress at molars, bending and shear stress on the mandibular corpus, and condylar stress. We found larger estimated bite forces, greater resistance to bending loads, and lower stress emerging from the larger muscle attachment areas and shorter and deeper mandibular corpora for both Pecari tajacu and Tayassu pecari relative to Parachoerus wagneri. Peccaries (P. tajacu and T. pecari) with more powerful biomechanical attributes feed mainly on tougher foods (e.g., palm fruits). These results support the hypothesis that species eating tough foods tend to have a feeding morphology mechanically adapted to stronger bites and greater biting resistance, which must be closely reflected in their craniomandibular shape.

Integrative and …, 2007

Synopsis The evolution of cranial design in lepidosaurians is characterized by a general trend toward the loss of cranial elements. The evolution of relatively lighter skulls in squamates appears tightly coupled to a reduction in relative mass of the jaw adductor, implying functional consequences for bite force and feeding behavior. Interestingly, among squamates the postorbital bar was reduced or lost at least twice independently and taxa characterized by the loss of these cranial elements (e.g., geckos and varanids) are generally reported as having a mobile skull. In Gekkotans, the loss of the postorbital bar was accompanied by a reduction of the supratemporal bar, resulting in a pronounced cranial kinesis. Our data show that having a kinetic skull has functional consequences and results in a reduction in bite force. The lower bite force may in turn be responsible for the decreased feeding efficiency as reflected in the longer duration of intra-oral transport cycles. Gekkotans, however, appear to exploit their intracranial mobility in ways that increases the velocity of jaw movement during opening and closing, which may allow them to capture more elusive prey. The morphological changes observed in the evolution of the cranial system in squamates appear tightly linked to functional and constructional demands on the skull, making squamate skull evolution a model system to investigate the consequences of morphological changes in a complex integrated system of performance, behavior, and ecology.

Journal of Morphology, 2009

Weaning represents a challenging transition for young mammals, one particularly difficult for species coping with extreme conditions during feeding. Spotted hyenas (Crocuta crocuta) experience such extreme conditions imposed by intense feeding competition during which the ability to consume large quantities of food quickly is highly advantageous. As adult spotted hyenas have massive skulls specialized for durophagy and can feed very rapidly, young individuals are likely at a competitive disadvantage until that specialized morphology is completely developed. Here we document developmental changes in skull size, shape, and mechanical advantage of the jaws. Sampling an ontogenetic series of Crocuta skulls from individuals ranging in age from 2 months to 18 years, we use linear measurements and geometric morphometrics to test hypotheses suggesting that size, limited mechanical advantage of the jaws, and/or limited attachment sites for jaw muscles might constrain the feeding performance of juveniles. We also examine skull development in relation to key life history events, including weaning and reproductive maturity, to inquire whether ontogeny of the feeding apparatus is slower or more protracted in this species than in carnivores not specialized for durophagy. We find that, although mechanical advantage reaches maturity in hyenas at 22 months, adult skull size is not achieved until 29 months of age, and skull shape does not reach maturity until 35 months. The latter is nearly 2 years after mean weaning age, and more than 1 year after reproductive maturity. Thus, skull development in Crocuta is indeed protracted relative to that in most other carnivores. Based on the skull features that continue to change and to provide additional muscle attachment area, protracted development may be largely due to development of the massive musculature required by durophagy. These findings may ultimately shed light on the adaptive significance of the unusual “role-reversed” pattern of female dominance over males in this species. J. Morphol. 2010. © 2009 Wiley-Liss, Inc.

Systematic biology, 2013

Cat-like carnivorous mammals represent a relatively homogeneous group of species whose morphology appears constrained by exclusive adaptations for meat eating. We present the most comprehensive data set of extant and extinct cat-like species to test for evolutionary transformations in size, shape and mechanical performance, that is, von Mises stress and surface traction, of the mandible. Size and shape were both quantified by means of geometric morphometrics, whereas mechanical performance was assessed applying finite element models to 2D geometry of the mandible. Additionally, we present the first almost complete composite phylogeny of cat-like carnivorans for which well-preserved mandibles are known, including representatives of 35 extant and 59 extinct species of Felidae, Nimravidae, and Barbourofelidae. This phylogeny was used to test morphological differentiation, allometry, and covariation of mandible parts within and among clades. After taking phylogeny into account, we found that both allometry and mechanical variables exhibit a significant impact on mandible shape. We also tested whether mechanical performance was linked to morphological integration. Mechanical stress at the coronoid process is higher in sabertoothed cats than in any other clade. This is strongly related to the high degree of covariation within modules of sabertooths mandibles. We found significant correlation between integration at the clade level and per-clade averaged stress values, on both original data and by partialling out interclade allometry from shapes when calculating integration. This suggests a strong interaction between natural selection and the evolution of developmental and functional modules at the clade level.

The Anatomical …, 2010

Australopithecus africanus is an early hominin (i.e., human relative) believed to exhibit stress-reducing adaptations in its craniofacial skeleton that may be related to the consumption of resistant food items using its premolar teeth. Finite element analyses simulating molar and premolar biting were used to test the hypothesis that the cranium of A. africanus is structurally more rigid than that of Macaca fascicularis, an Old World monkey that lacks derived australopith facial features. Previously generated finite element models of crania of these species were subjected to isometrically scaled loads, permitting a direct comparison of strain magnitudes. Moreover, strain energy (SE) in the models was compared after results were scaled to account for differences in bone volume and muscle forces. Results indicate that strains in certain skeletal regions below Published online in Wiley InterScience (www.interscience.wiley. com).

Journal of Experimental Biology, 2021

Cranial morphology in lepidosaurs is highly disparate and characterised by the frequent loss or reduction of bony elements. In varanids and geckos, the loss of the postorbital bar is associated with changes in skull shape, but the mechanical principles underlying this variation remain poorly understood. Here, we sought to determine how the overall cranial architecture and the presence of the postorbital bar relate to the loading and deformation of the cranial bones during biting in lepidosaurs. Using computer-based simulation techniques, we compared cranial biomechanics in the varanid Varanus niloticus and the teiid Salvator merianae, two large, active foragers. The overall strain magnitude and distribution across the cranium were similar in the two species, despite lower strain gradients in V. niloticus. In S. merianae, the postorbital bar is important for resistance of the cranium to feeding loads. The postorbital ligament, which in varanids partially replaces the postorbital bar,...

Journal of Zoology, 2019

Brain enlargement is an adaptation in animals that use the space in three dimensions and need to integrate information of complex environments. As consequence, this adaptation can result in differences in skull shape among species with different types of locomotion and level of arboreality. We directly tested for the relation between the cranial shape and arboreality (based on field data) of 11 Sigmodontinae rodent species from a Neotropical savanna (Cerrado). For that, we used geometric morphometrics considering both dorsal and lateral views of the cranium. We also accounted for any possible allometric effects (i.e. the relationship between size and shape) and evolutionary constraints (i.e. phylogenetic signal) on the cranial shape. The dorsal view presented strong allometric effects but no phylogenetic signal. On the other hand, the lateral view showed a weak allometric effect and a significant phylogenetic signal. After controlling for size and evolutionary constraints, we found significant relationships between rodent arboreality and cranial shape for both lateral (r 2 = 0.74) and dorsal cranium views (r 2 = 0.40). Patterns for both views showed that arboreal rodents present more expanded crania, suggesting larger brains. The dorsal view showed a general cranial expansion in arboreal rodents, whereas the lateral view showed a more rounded and posteriorly expanded cranium. This later suggests a larger cerebellum, an important brain portion responsible for orientation and sense of balance. Our study provides evidence that the cranial shape can be used as a proxy to infer arboreal activity of sigmodontine rodents. Moreover, the observed differences in cranial shape between arboreal and terrestrial species are probably related to brain enlargement in the former driven by the need to cope with a three-dimensional environment.

Journal of …, 2008

Extant and fossil crocodilians have long been divided into taxonomic and/or ecological groups based on broad patterns of skull shape, particularly the relative length and width of the snout. However, these patterns have not been quantitatively analyzed in detail, and their biomechanical and functional implications are similarly understudied. Here, we use geometric morphometrics and finite element analysis to explore the patterns of variation in crocodilian skull morphology and the functional implications of those patterns. Our results indicate that skull shape variation in extant crocodiles is much more complex than previously recognized. Differences in snout length and width are the main components of shape variation, but these differences are correlated with changes in other regions of the skull. Additionally, there is considerable disparity within general classes such as longirostrine and brevirostrine forms. For example, Gavialis and Tomistoma occupy different parts of morphospace implying a significant difference in skull shape, despite the fact that both are traditionally considered longirostrine. Skull length and width also strongly influence the mechanical performance of the skull; long and narrow morphotypes (e.g., Tomistoma) experience the highest amount of stress during biting, whereas short and broad morphotypes (e.g., Caiman latirostris) experience the least amount of stress. Biomechanical stress and the hydrodynamic properties of the skull show a strong relationship with the distribution of crocodilians in skull morphospace, whereas phylogeny and biogeography show weak or no correlation. Therefore, ecological specializations related to feeding and foraging likely have the greatest influence on crocodilian skull shape.

A major goal of evolutionary studies is to better understand how complex morphologies are related to the different functions and behaviours in which they are involved. For example, during locomotion and hunting behaviour, the head and the eyes have to stay at an appropriate level in order to reliably judge distance as well as to provide postural information. The morphology and orientation of the orbits and cranial base will have an impact on eye orientation. Consequently, variation in orbital and cranial base morphology is expected to be correlated with aspects of an animal's lifestyle. In this study, we investigate whether the shape of the skull evolves in response to the functional demands imposed by ecology and behaviour using geometric morphometric methods. We test if locomotor habitats, diet, and activity pattern influence the shape of the skull in musteloid carnivorans using (M)ANOVAs and phylogenetic (M)ANOVAs, and explore the functional correlates of morphological featur...